In short
- Build the maintenance plan around pruning, spray, mowing and harvest, and log every service.
- Check nozzles, PTO shields, brakes and tires first, and follow the manual and the label.
- Get itemized invoices and written terms for any shared or hired equipment.
Plan by the vineyard calendar
Vineyard equipment has a rhythm. Dormant pruning in winter, bud break and canopy work in spring, spraying through the growing season, and harvest in late summer or fall. Build your maintenance plan around that rhythm. Service the tractor and sprayer before the spray program starts, check mowers before the first cut, and go over harvest equipment and bins before the crew arrives. Use the manufacturer manuals for oil, filter and grease intervals, and write each service in a log with hours or date, what was done and who did it. If you hire a mechanic, ask about their experience with narrow vineyard tractors and specialty sprayers, and whether they will show you what they found.
Tractors and implements
Narrow tractors work in tight rows, so check what takes a beating there: tires, front axle pivots, steering links, brakes and the roll protection structure. Look for sidewall cuts from trellis wire. Check the PTO shaft and shields, since exposed rotating parts are a serious hazard. Look at the hitch, hydraulics and lights. Grease according to the manual. Keep the cab or operator station clean and free of loose tools. Check seatbelts if you have a rollover structure. Tractors working slopes need extra care: confirm brakes and stability, and follow the manufacturer and safety recommendations. Rules on operator safety and training vary by state, so ask your Extension office or state agency about requirements.
Sprayers, nozzles and calibration
Sprayer upkeep protects your fruit and your license. Check pumps, hoses, fittings, tank agitation, strainers and nozzles. Replace worn nozzles on a schedule from the sprayer manual, and compare output across nozzles by catching water for a fixed time and comparing each to the average. Clean filters often, and rinse tanks according to the product label. Calibrate for your canopy and spray program with help from Extension or your agronomist, since vineyard sprayers differ widely. Keep all application records the way your state requires; pesticide record and applicator rules vary by state, so confirm with your state department of agriculture. Store pesticides in a locked, labeled place away from feed, fuel and drinking water.
Mowers, hedgers and canopy tools
Mowers and undervine tools run through dirt, grass and trellis posts. Sharpen or replace blades on schedule, check gearboxes for oil level and leaks, and look at belts and shields. Inspect hedgers and leaf removers for loose cutter bars, worn bearings and hydraulic leaks. A pruning crew using pneumatic or electric shears should have tools cleaned, blades sharp and batteries or air lines in working condition. Oil pruning tools as the manual says. Store blades dry. Test hydraulic hoses for chafing against trellis wire. When you hire a pruning or canopy crew with its own equipment, ask who supplies the tools, who is responsible for repair and what happens if a machine damages a vine or post.
Harvest gear and cellar-side items
Before harvest, test every piece that moves fruit. Check the harvester or picking bins, forks, bin dumpers, trailers, conveyor belts and scales. Sort out sanitation: bins and tubs should be clean, since residue carries into the cellar. If you deliver to a winery, ask what they require for bins, loads and weight tickets. Check your trucks and trailers for lights, brakes and tires, and confirm any needed license or registration for hauling. Hauling rules and weight limits vary by state, so confirm with your state transportation agency. Keep spare parts you know you will need, such as belts, fuses and hose fittings, because harvest does not wait on a parts truck.
Records and what to put in writing
Keep a single binder or spreadsheet with one page per machine. List date, hours, service, parts, cost and the person who did it. For work done by a dealer or independent mechanic, get an itemized invoice and a note of anything to watch. Keep warranty papers and manuals together. Insurance, lenders and auditors may ask for maintenance history, and a clean record also helps at resale. If a machine is shared with a neighbor or hired out, write down the terms: who pays for repairs, who is responsible for damage and what condition it should be returned in. Look up your state in the directory for providers near you.
Find providers near you
Pick your state to see vets, custom operators, dealers, elevators and other farm services.
