Farm service guides and a state-by-state directory for farmers and ranchersA farm.FM network site · Farm news →
AgServicesDirectoryWho to call, state by state
Home › Guides › Worksheets, Checklists & Calibration Guides › Nursery Irrigation Equipment Record

Nursery Irrigation Equipment Record

A running record of your pumps, valves, filters and emitters makes it easier to schedule water, find the weak zone and show a buyer or inspector how the system is kept.

Worksheets, Checklists & Calibration Guides3 min read664 words

In short

  • Keep one page per pump, filter set and zone with baseline pressure and flow.
  • Run a catch can test each season and calculate distribution uniformity.
  • Log every repair and keep backflow and water test paperwork in one place.

What the record is for

Nursery crops depend on water on a schedule, and potted stock dries out fast. A broken nozzle or a clogged filter in one zone can cost a block of plants before anyone sees it. The record is a set of pages, one for each part of the system, kept current by whoever works on it. It helps with three things. You can troubleshoot faster, because you know what was installed, when and at what pressure. You can plan replacements before the busy season. And you can answer questions from a certifier, a buyer or a water agency without hunting for receipts. Start with a map of zones, drawn by hand if need be, with numbered valves.

Pumps, mainline and filters

For each pump, write the make, model, horsepower, and the normal operating pressure and flow at the gauge. A baseline reading when the system is new, or freshly serviced, is gold. If pressure drops with the same valves open, you have a leak, a worn pump or a plugged filter. Log filter cleaning dates and the pressure drop across each filter. Many manufacturers give a pressure difference at which to clean or backwash, so look it up and write that number on the page. Record the date of any chemical injection, water test or backflow preventer test. Backflow testing requirements are set locally, so ask your water supplier or state agency.

Zones, heads and emitters

For each zone, list the crop, the pot size, the type of nozzle or emitter, the spacing, the rated flow per emitter and the number of emitters. Multiply and compare to what you measure. If an emitter is rated for a flow and you count 400 of them, the zone should deliver 400 times that flow, and a big shortfall means leaks or clogging. Record the date each emitter type was replaced. Worn nozzles pass more water than rated, and clogged ones pass less, so check them against the manufacturer's data.

The catch can test

Once or twice a season, set out a grid of straight-sided cans or cups across a zone, run it for a measured time, and measure the depth in each. Say you run 30 minutes and the average catch is 0.50 inch. That equals 1.0 inch per hour. Then rank the cans. Take the average of the driest quarter and divide by the overall average. If the driest quarter averages 0.40 inch and the overall average is 0.50, the distribution uniformity is 0.80. A low number means some pots are being overwatered to keep the dry spots alive. Record the result on the zone page.

Fixing what the record shows

Use the record to rank repairs. Start with zones where uniformity is poor or pressure is wrong. Write down every repair, with date, part and who did it. Keep spare nozzles, fittings and a few feet of pipe on the shelf. Check water use reporting and well permit rules with your state agency, because they vary.

Mistakes to avoid

Do not let the record live in one person's head, and do not forget to update it after a change. Do not accept a vague "it was fixed" from a contractor. Get the work in writing.

Seasonal start-up and shutdown

Write a short start-up list and a shutdown list and keep both with the record. In spring, flush mainlines, open the ends of laterals, clean filters, test every zone and note what failed. In fall, drain lines that can freeze, protect the pump and backflow devices as the manufacturer directs, and store controllers and sensors properly. Date each list when it is done. Frost damage is cheap to prevent and expensive to find in April, so do not rely on memory.

Find providers near you

Pick your state to see vets, custom operators, dealers, elevators and other farm services.

Keep reading