In short
- Test the scale with known weights at several points and record the error percentage.
- Work out each ingredient's target weight before loading and load in a set order.
- Log target and actual weights, and recheck scales each season and after repairs.
Start with the manual and the scale
Pull out the manufacturer manual for your mixer and the weighing system. It tells you the capacity, the recommended fill level, the mixing time and the calibration procedure for your indicator. Check that the scale heads and load cells are clean, that no feed or ice has built up around the frame, and that the wagon sits level. A wagon on a slope will read wrong. Check the display and battery, and look for loose or damaged cables. Rodents love wiring, so look closely.
Test the scale with known weights
Use certified test weights or a known quantity such as a weighed pallet of bagged feed or mineral. Zero the indicator with the wagon empty, then add a known amount, for example 1,000 pounds, and read the display. If the display shows 1,030, the error is 30 divided by 1,000, or 3 percent. Check at several points across the range, such as 500, 1,000 and 2,000 pounds, because errors are not always the same at each level. Record each reading. If the scale is off or drifts, follow the manual to recalibrate, or call the dealer.
Calculate the batch
A batch is how many animals you feed times the as-fed amount per head. Say 80 cows each get 50 pounds as fed per day, so 4,000 pounds total. If your ration is 30 percent corn silage as fed, that ingredient is 1,200 pounds in the batch. Work this out for every ingredient from your nutritionist's ration, and write the target weight on a card. Keep as-fed and dry matter straight: 1,000 pounds of feed at 35 percent dry matter holds 350 pounds of dry matter. Test moisture in silage and haylage regularly, since changes in moisture shift the ration.
Load in the right order
Follow your nutritionist and the manual on loading order, since it affects mixing. Many operations add dry or long hay first, then grains and supplements, then wet feeds, but your nutritionist may differ. Load each ingredient to its target weight, zero or note the running total between ingredients, and do not guess. Overshooting one ingredient by 10 percent throws the whole ration, and you cannot easily take it back out. Do not overfill the wagon above the level the manufacturer recommends, because poor mixing and spills follow.
Check mixing and particle size
Time the mixing from the last ingredient, using the interval your manual and nutritionist set. Overmixing chops forage too fine and reduces effective fiber. Undermixing leaves clumps and sorting. Check knives, augers and screws for wear, since worn parts cause uneven mixing. Ask your nutritionist about a particle separator test of the finished ration, and compare against their target. Take samples from the front, middle and end of the bunk to see if the ration stays consistent.
Keep records and fix mistakes
Keep a log with date, batch size, each ingredient's target and actual weight, and any notes about moisture or substitutions. Compare the total fed to the total refused each day to see how close the ration is to what cows eat. Recheck the scale with test weights at least at the start of each season and after any repair or heavy impact. Flag any ingredient that is regularly off target. If errors persist, call the dealer. Follow your nutritionist and the manual for feed and equipment details, because herd needs and models vary.
Common mistakes to avoid
The most common errors are simple. Operators load by feel instead of by scale, trust a display that has not been tested in a year, and fill the wagon past the recommended level. Others forget to zero the scale between ingredients, mix on a slope, or ignore a worn knife until the mix looks poor. Do not assume that a scale reading is right just because it is digital. Another frequent mistake is using the same batch recipe when silage moisture changes. Spend ten minutes testing instead of a week wondering why production dropped.
Find providers near you
Pick your state to see vets, custom operators, dealers, elevators and other farm services.
