In short
- Copy every service interval from the manual onto one sheet with last-done dates or hours.
- Put big jobs in winter, run-ups before the season and checks during it.
- Keep written records of work done and parts used for repair and resale decisions.
Build it from the manuals
Start with the operator manual for every machine. Each one lists service intervals by hours or by season, such as engine oil, hydraulic filters, grease points, belts and coolant. Copy those into one sheet, one line per task, with the interval and the last date or hour meter reading. Then put the tasks onto a calendar. Hour-based tasks need an hour meter reading, so write down the reading each time you fuel up or park a machine for the season. If a manual is missing, ask the dealer or the manufacturer for a copy. Intervals and fluid specs differ by model, so do not guess.
Winter and early spring
This is when the big jobs go. Do the deep service on planters, drills, sprayers and tillage tools. Replace worn parts, grease everything, and check bearings, chains, hoses and tires. Test the batteries and charge them. Pressure wash and look for cracks, bent shanks and loose bolts. Make a parts order early, because shops get busy and parts back up when everyone starts the same week. For sprayers, replace nozzles and check pumps, hoses and filters. Write each completed task on the calendar. Take care with lockout, jack stands and blocking when you work under or inside a machine.
Before each season of use
Two weeks before a machine is due in the field, do a short run-up. Start it, run it, and watch the gauges. Check fluids, belts, lights and safety shields. Look at the PTO shafts and the shields, which must turn freely. Grease the zerks. For a combine or baler, run it empty and listen. A machine that fails in the shop costs little. The same failure in the field in the middle of a good weather window can cost a week. Keep a small kit of belts, filters, fuses and fittings that go on the machines you rely on.
During the season and at the end
Daily or each shift, check oil, coolant, grease points marked daily in the manual and tire pressures. Weekly, look at air filters, chain tension and any leaks. When the season ends, clean the machine, make a note of problems, and fix them while they are fresh. Drain or treat fuel and lubricate exposed metal as the manual advises. Store under cover when you can. Write end-of-season notes on the calendar for the winter crew, which may be you.
Using the records
Oil sampling through a lab can show wear before a failure, if your equipment dealer or oil supplier offers it. Use your records to decide when to trade or to repair. They also help with resale and with taxes, though tax treatment of repairs and equipment varies, so ask your accountant. If a custom operator or a mechanic services your machines, ask for a written list of what was done and the hours.
Mistakes to avoid
Do not wait for a noise, skip greasing because the last person said they did it, or leave the calendar on a shop wall that no one reads.
Sharing the work
Most farms have one person who knows every grease point, and that is a risk. Print the calendar and the task list and hang it where all the operators can see it. Teach the hired help and the kids the daily checks. Assign each machine to someone, and let that person sign off. If you have a trusted mechanic, ask which jobs you should leave to the shop, particularly hydraulic, electrical and emissions system work, and what you can safely do yourself.
Find providers near you
Pick your state to see vets, custom operators, dealers, elevators and other farm services.
