Farm service guides and a state-by-state directory for farmers and ranchersA farm.FM network site · Farm news →
AgServicesDirectoryWho to call, state by state
Home › Guides › Worksheets, Checklists & Calibration Guides › Spring Equipment Ready Checklist

Spring Equipment Ready Checklist

Spring gives you few forgiving days. Work through tractors, tillage, planters, trucks and shop supplies in a set order so breakdowns happen in the shop and not in the field.

Worksheets, Checklists & Calibration Guides3 min read663 words

In short

  • Rank machines by first use and book dealer service and parts early.
  • Inspect fluids, filters, belts, tires, hitches and guards before the first field.
  • Keep a written list and service record for every machine, and review safety with all operators.

Set Priorities by Calendar

List the machines in the order you will use them and work backward. If the planter runs first, it gets attention first, then the sprayer, tillage tools and hay equipment. Note which jobs you can do yourself and which need a dealer, because dealer shops fill up quickly as soon as the weather warms. Call early for appointments and parts. Check the operator's manuals for scheduled service. Write a list with the machine, the job, who does it, the date and the status. A list on the shop wall keeps everyone on the same page, including family and hired help.

Tractors and Power Units

Change engine oil, fuel filters and air filters according to the manual. Check coolant, hydraulic and transmission fluids, and take an oil sample if you want to see wear trends. Test the battery and clean the terminals. Inspect belts, hoses, tires and tire pressure. Grease all fittings and check the PTO shield and driveline, the three-point hitch and the drawbar. Test lights, the horn, seat belt and ROPS for damage. Run the tractor under load for a while and watch gauges. Fuel stored over winter may have water or growth, so drain the sediment and use fresh fuel as the manual suggests.

Planting, Tillage and Drills

Planters and drills need careful inspection, because small defects change stands. Check seed tubes, meters, discs, bearings, gauge wheels, closing wheels and chains. Replace worn parts, set down pressure and spacing according to the manual, and calibrate seed rates. Check the monitor, sensors and hydraulic hoses. On tillage tools, inspect shanks, points, discs, bearings and hitch pins, and replace the worn edges that no longer scour. Walk each machine with a notebook and record every worn part. Order parts now. Parts shops are very busy in spring, and a worn disc will take as long to get as a new one.

Sprayers, Haying Tools and Trucks

Run the sprayer on clean water and fix leaks, replace nozzles and calibrate. For hay equipment, check knives, sections, tines, belts, bale chambers and tires, and grease everything. Check the grain truck and trailers for brakes, tires, lights, tarps and registration. Fill the shop with the supplies you always run short of: hydraulic hose ends, grease, filters, fasteners, cotter pins and welding rod. Inspect fire extinguishers and first-aid kits. Check the equipment on your own farm or ask your custom hire operator what they have serviced, since you rely on their machines in the same weeks.

Safety and Training

Review the safety rules with everyone who will operate machines, including family and seasonal help. Walk through shutdown, lockout, PTO guarding, roll bars, safe starting procedures and emergency contacts. Check fuel storage, grain bins and shop ventilation. Mark the location of the nearest phone and the fire extinguisher. Make sure all drivers have the correct license for the vehicles they run, and know road rules for slow-moving equipment, which vary by state. Hired labor, insurance and workers' compensation rules also vary; confirm with your state agencies and insurance agent. Fatigue rises in planting season, so plan rest breaks and meals.

Close the Loop With Records

When a machine passes inspection, check it off and record hours, service done, parts used and the date. Keep receipts together for tax and warranty purposes, and ask your accountant how to treat repair and maintenance costs. Photograph serial numbers for insurance. At the end of the season, note which machine caused trouble so next year's list starts from facts. If you hire out any spring work, such as custom planting, spraying or hauling, get quotes and schedules in writing early. Look up your state in the directory for equipment repair and custom operators.

Find providers near you

Pick your state to see vets, custom operators, dealers, elevators and other farm services.

Keep reading