Farm service guides and a state-by-state directory for farmers and ranchersA farm.FM network site · Farm news →
AgServicesDirectoryWho to call, state by state
Home › Guides › Worksheets, Checklists & Calibration Guides › Hay Harvest Equipment Checklist

Hay Harvest Equipment Checklist

Good hay comes from the right machine at the right moisture on the right day. This checklist covers the equipment you need from mower to storage.

Worksheets, Checklists & Calibration Guides3 min read658 words

In short

  • Bale at the moisture range your Extension guide gives for your bale type.
  • Handle legume hay gently so the leaves stay on the stem.
  • Check stored hay for heat in the first weeks, and call the fire department if it keeps rising.

Mowing and conditioning

Cutting is where quality starts. Check the knives, guards or discs on the mower-conditioner, and set the cutting height so that stubble is left to help regrowth and drying, as advised by your state Extension forage specialist. Adjust conditioner rolls or flails to crimp or crush stems without shredding leaves, since stems hold most of the water. The aim is for the whole plant to dry evenly. Test the machine in a small area and look at the swath behind it before cutting a whole field.

Tedding and raking

A tedder spreads the cut hay to dry faster, and a rake puts it into windrows for baling. Check the tines for broken or bent teeth, the gearboxes and the drive. Set the rake so it moves hay gently, because rough raking shatters leaves of legumes like alfalfa, and leaves are the most nutritious part. Rake when the hay is dry enough, not too early, and not so dry that leaves fall off. Plan the windrow size to match the baler pickup, so the baler feeds evenly.

Baler and moisture

Moisture at baling matters more than almost anything. Baling too wet risks mold and heating, and in some cases fires. Many Extension guides list target ranges that differ by bale type, with small squares and round bales needing different levels, so look at your state Extension guide for your own numbers. Use a moisture tester and sample from several spots in the windrow, since the thickest part dries last. Check the baler pickup, belts or chambers, density settings and the twine or net wrap supply. A preservative applicator can help in some conditions, but follow the label.

Wrapping and handling

If you make baleage, check the wrapper, film supply and the handling gear. Wrapped bales need to be moved gently, because a puncture lets air in. Keep tape to patch holes. For dry hay, check the bale loader, spear, grapple, trailer straps and ramps. Check that the tractor can carry a bale at the weight it is rated to lift, since heavy bales can lift the front wheels. Wear your belt and carry loads low.

Storage and fire safety

Stack bales in a way that keeps air moving and keeps rain off. Leave gaps in a barn so heat can escape. Check for heating in the first few weeks, since fresh hay can heat. A rise in temperature that continues is a sign to call the fire department and not to pull the stack apart on your own. Your insurance agent and the local fire department can advise on storage rules. Keep outdoor stacks on gravel or pallets, and keep them away from buildings.

Hiring custom hay work

If you hire a custom baler, ask what machine they use, what moisture they bale at, and how the bale weights compare. Agree on who tests the moisture, and when. Get the price per bale or per acre in writing, along with timing and weather terms. Extension custom-rate surveys can show you how fees compare, though they vary by region.

Weather, timing and mistakes

Equipment cannot fix a bad weather plan. Watch the forecast, and give the hay enough drying days for your region and crop. Common mistakes include cutting a thick stand and expecting it to dry like a thin one, baling tough hay because rain is coming, and failing to test moisture in the thickest windrow. Others are setting the baler density too high for the moisture, running a dull mower, and stacking hay hot. If you are unsure of the target for your crop and location, call your county Extension office, who can give guidance and may lend a moisture tester.

Find providers near you

Pick your state to see vets, custom operators, dealers, elevators and other farm services.

Keep reading