Farm service guides and a state-by-state directory for farmers and ranchersA farm.FM network site · Farm news →
AgServicesDirectoryWho to call, state by state
Home › Guides › Worksheets, Checklists & Calibration Guides › Farm Equipment Fire Prevention Checklist

Farm Equipment Fire Prevention Checklist

Equipment fires start small and usually in the same places. This checklist covers the checks that cut risk during harvest, in the shop, and in storage.

Worksheets, Checklists & Calibration Guides3 min read663 words

In short

  • Clean chaff and residue off hot surfaces at every fuel stop in dry crop.
  • Replace damaged hoses and fuses only with parts that match the manual.
  • Mount a rated extinguisher on every machine and teach every worker to use it.

Clean the heat and fuel sources

Most machinery fires begin where heat, dust and something that burns meet. Chaff and crop residue pile up around exhausts, turbochargers, bearings and belts. At the start of each shift in dry crop, blow or brush debris off the engine deck, exhaust, battery area and drive components. Use compressed air, but keep the nozzle away from bearings you could damage, and follow the machine's manual for cleaning points. In heavy residue, stop and clean more often. A few minutes of cleaning at the fuel stop costs less than a combine.

Check fuel and hydraulic lines

Look for rubbed, cracked or weeping hoses. A pinhole in a pressurized hydraulic or fuel line can spray a fine mist onto a hot surface. Check clamps and routing, and look for places where a line touches a sharp edge or a moving part. Replace damaged lines with parts that meet the manufacturer's specification, not whatever fits. Wipe up oil and grease leaks rather than letting them collect, since the film catches dust and fuels a small fire. If the machine has a leak you cannot fix today, park it until you can.

Inspect electrical systems and batteries

Wiring faults cause many fires. Look for chafed insulation, loose terminals, corroded battery posts and added-on accessories wired with undersized cable. Check that fuses match the rating called for in the manual, since a larger fuse defeats its purpose. Keep battery boxes clean and covers secure. Disconnect the battery on equipment stored for long periods if the manual allows it. If you have modified lighting or auxiliary equipment, have someone qualified review the wiring rather than trusting the splice that has held for years.

Carry and maintain extinguishers

Put a properly rated extinguisher on each tractor, combine and in the shop, mounted where you can reach it from the ground. Check the gauge on a schedule, and have extinguishers serviced or replaced per the maker's instructions and any local fire marshal guidance. Keep one in the truck that hauls fuel. Teach every worker, including seasonal help, to use one and to call for help first when a fire is beyond a small one. Never go back for equipment. A shovel and a water supply near field edges are useful during dry harvest.

Shop and storage habits

Keep welding, grinding and cutting away from fuel, grease and dry debris, and keep a fire watch for some time after the work ends, because slag can smolder. Store oily rags in a metal container with a lid. Keep fuel in approved containers and out of the equipment shed where practical. Do not store hay or bedding next to machinery. Keep a clear path to doors, and keep the area around outlets and heaters free of clutter. Ask your insurance agent which storage and fuel arrangements affect your coverage, as requirements vary.

Plan for the day it happens

Write down an emergency plan: the address as the fire department knows it, the road access for trucks, where water comes from, and who calls whom. Post the address by the shop phone and in each cab. Introduce yourself to the local fire department and ask them what they would want you to do for field fires and shop fires. Keep a firebreak or disked strip along the field edge if your local conditions call for it. Review the plan with your crew before the season, not during it. Run a short drill once a year so everyone knows where the extinguishers, shovels and water sources are, and who shuts off fuel. Fires move fast in dry stubble, and a plan that people have practiced works better than one they have only read. Write down what went wrong in the drill and fix it.

Find providers near you

Pick your state to see vets, custom operators, dealers, elevators and other farm services.

Keep reading