Farm service guides and a state-by-state directory for farmers and ranchersA farm.FM network site · Farm news →
AgServicesDirectoryWho to call, state by state
Home › Guides › Worksheets, Checklists & Calibration Guides › Cover Crop Seeder Calibration Log

Cover Crop Seeder Calibration Log

A cover crop log records what you set, what you caught and what you planted, so next year's seeding starts from facts. Here is how to keep one and use it.

Worksheets, Checklists & Calibration Guides3 min read661 words

In short

  • Record seed lot, tag numbers, settings, catch weights and results for each pass.
  • Use pure live seed math to turn a recommended rate into a bulk seeding rate.
  • Calibrate each species and recheck mixes at the start and end of a field.

Why a log helps

Cover crop seed differs from commercial grain. It is often small, fluffy, awkwardly shaped or sold in mixes. Settings from a grain drill rarely carry over. A log built around each calibration pass will save you from repeating the same trial and error each fall. It also helps if a hired operator uses your drill. Check the manufacturer manual for your drill, planter, air seeder or broadcaster, since each has its own way to set rates.

What to record

Each line of the log should include the date, field, operator, machine, species, seed lot number, purity and germination from the tag, seed rate target, meter or gate setting, speed, catch test result and notes on conditions. Add the seed price paid if you want cost per acre. Keep the log in the machine or the shop, not in your head. A page for each species is easier to flip through than a single running list.

Adjust for seed quality

The seed tag lists purity and germination. Multiply them to get pure live seed, or PLS. If purity is 98 percent and germination is 90 percent, PLS is 0.98 times 0.90, or 0.882. Say your recommendation is 60 pounds of PLS per acre. Divide 60 by 0.882 and you get about 68 pounds of bulk seed per acre. Without this step, you may seed lighter than you meant to. Ask your Extension office or seed dealer what rate they suggest for your species and goal.

Run the catch test

Pick a test distance. For a drill 10 feet wide, one tenth acre is 4,356 square feet divided by 10, or 435.6 feet. At 68 pounds per acre, the machine should drop 6.8 pounds in that distance. Run the test, catch and weigh the seed, and compare. If you caught 6.0 pounds, divide 6.8 by 6.0, which is about 1.13, so raise the setting about 13 percent and test again. Write down each attempt. Test with the actual seed and the right hopper level, because a full box and an empty one can feed differently.

Mixes and special cases

Seed mixes are tricky because heavy and light seed separate as you drive. Check the mix at the start and at the end of a field. Some people calibrate each species alone and then use separate boxes. Large seed like peas and small seed like clover may need different rollers or settings. Fluffy seed may bridge, so stir the hopper. Planting depth matters too. Small seed placed too deep may not come up, so follow guidance for each species.

After seeding

Compare the tank use to the acres covered. Record emergence in two or three weeks, and the stand in the fall. That info will tell you whether the setting worked. Keep notes on weather, since a dry fall changes results. If you are using a custom operator, hand them the log and ask them to fill in the same fields. If you are cost sharing with a USDA program or a state agency, ask what seeding records they require. Look up your state in the directory for custom seeding help.

Costs and cost share

The log doubles as a cost record. Add the seed cost per bulk pound, multiply by the bulk rate, and you have seed cost per acre. Using the earlier example, 68 pounds per acre at your actual seed price gives a figure you can compare with other species or mixes. Add fuel and labor if you want the full cost. If a USDA agency or state program shares costs, ask what practice standards, seeding dates and records are needed, because a missed requirement can cost the payment.

Find providers near you

Pick your state to see vets, custom operators, dealers, elevators and other farm services.

Keep reading