In short
- Start from the manufacturer's service intervals, then add your own breakdown history.
- Do a short walk-around before every use and a full inspection before each season.
- Log hours, findings, and repairs for each machine, and review the log every year.
Why a calendar beats memory
Machines fail at the worst time, and many of those failures start with something small that was missed weeks earlier. A written calendar makes inspection routine and gives you a record for resale and for insurance claims. Start with each machine's manufacturer manual, which lists service intervals by hours or calendar time. Add your own history of what has broken before. Put the whole schedule on one page for the shop and keep a log for each machine. A dry-erase board next to the door works as well as any software.
Daily and pre-use checks
Before each use, walk around the machine. Check engine oil, coolant, hydraulic fluid, and fuel. Look at tires and tracks, belts, hoses, and lights. Inspect guards and shields, and check that the PTO shaft shield turns freely. Look under the machine for drips. Check the hitch and pins on implements. Test brakes, steering, and the seat belt. Check the fire extinguisher gauge. If something looks wrong, fix it before you start, because field repairs cost time and daylight. Make the check part of how every operator starts the machine, including hired help.
Seasonal inspections
Plan major inspections around your work cycle. Before planting, go through planters, drills, sprayers, and tillage tools: calibration, worn parts, bearings, hydraulic hoses, and electronics. Before harvest, do the same for combines, grain carts, trucks, augers, and dryers. Before winter, drain or protect water lines, change fluids as the manual says, and store machines clean and dry. After the season, write down every problem you worked around, since that list becomes your off-season repair plan. Ask your dealer when parts and service slots fill up, and book early.
Hours-based service intervals
For tractors and engines, the manual lists oil changes and filter changes by hours. Example: if the manual says to change engine oil every 250 hours and your tractor runs 600 hours in a year, you should plan on two changes and know that the second one comes close to a third. Write the hour reading at each service on the log, along with the date. Grease points often have shorter intervals, sometimes daily or every ten hours. Use the grease and fluid types the manual calls for, since the wrong fluid can void warranties and harm components. Confirm with your dealer when in doubt.
Calendar items beyond the machines
Add the periodic items that are easy to forget. Trailer lights and brakes, tires and hubs, and safety chains need checking before the hauling season. State vehicle inspections and registration renewals, commercial driver license requirements, and annual fire extinguisher service have deadlines that differ by state, so check with your state agency. Scales and grain handling equipment may need periodic checks. Put insurance renewal dates on the same calendar, since coverage and equipment lists should match. Add a date to review how well the calendar worked.
Keeping the log honest
Each entry should have the date, the machine, the hours, what was checked, what was found, and who did the work. Keep receipts attached. If you hire out a service, ask the shop to write their findings, including worn parts they noticed but did not replace. That list tells you what to plan for next. At the end of the season, review the logs and look for repeats. A machine that needs the same repair three times in a row needs a different fix. Share the log with employees so they know what to report and when.
Mistakes to avoid
Do not postpone an inspection because the weather is good, since good weather is when machines are in use and breaking. Do not mix up hours and calendar intervals, and follow whichever comes first if the manual says so. Do not trust a quick glance at a belt or hose; flex it and look for cracks. Do not forget implements and trailers, which get less attention than tractors. And do not let the log become a pile of notes nobody reads. Pick one place, one format, and one person who checks it each month.
Find providers near you
Pick your state to see vets, custom operators, dealers, elevators and other farm services.
