Farm service guides and a state-by-state directory for farmers and ranchersA farm.FM network site · Farm news →
AgServicesDirectoryWho to call, state by state
Home › Guides › Worksheets, Checklists & Calibration Guides › Farm Equipment Depreciation Calculator

Farm Equipment Depreciation Calculator

Depreciation is how the cost of a machine is spread across its life. This article shows the common methods, with worked arithmetic you can repeat on your own equipment.

Worksheets, Checklists & Calibration Guides3 min read658 words

In short

  • Tax depreciation and real loss of value are different numbers; do not mix them.
  • Divide yearly ownership cost by acres or hours to compare against a custom rate.
  • Check your salvage guess against what used machines actually sell for locally.

Two kinds of depreciation

There are two ways to look at depreciation, and farmers mix them up. Tax depreciation is what you deduct on your return, governed by IRS rules and your accountant's choices. Economic depreciation is the real drop in what a machine is worth as it ages and wears. They rarely match. A tractor can be fully written off for tax and still sell for good money. This article uses simple methods to estimate the economic side for budgeting, and then points to your tax preparer for the return. Do not use these figures on a tax filing without checking current rules.

The straight-line method

Straight-line is the easiest. Take the purchase price, subtract the salvage value you expect at the end, and divide by the years of life. Suppose a planter costs 90,000 dollars, you expect it to be worth 30,000 after ten years. The drop is 60,000, and divided by ten years that is 6,000 dollars per year. Each year the planter costs you 6,000 in lost value whether it plants one acre or a thousand. The weak point is the salvage guess, so test it against what comparable used machines in your region actually sell for.

Dividing the cost by acres or hours

Annual depreciation matters less than cost per unit of work. Take the 6,000 dollars and divide by the acres you plant. At 600 acres, that is 10 dollars per acre. At 1,200 acres, it drops to 5 dollars per acre. That is why a machine that fits your acreage costs less per acre than one that sits idle. For tractors and combines, divide by hours instead. A 12,000 dollar annual loss over 400 hours is 30 dollars per hour before fuel, repairs and labor. These numbers are what you compare against a custom operator's quote.

The declining-balance method

Machines lose more value early. A declining-balance estimate applies a fixed percentage to the remaining value each year. At 15 percent on a 100,000 dollar tractor, year one drops 15,000, leaving 85,000. Year two drops 12,750, leaving 72,250. Year three drops 10,837.50, leaving 61,412.50. Compare that against used-market prices for the same model after the same years. If your estimates run high or low, adjust the percentage. Auction results, dealer trade-in guides and published used-equipment value references are useful checks, and they change by market, so use current local information.

Add the other ownership costs

Depreciation is only part of what a machine costs. Add interest on the money tied up, which you can estimate as the average value times your borrowing rate. Add insurance and housing, and then repairs, fuel and labor. Take a 60,000 dollar average value at 7 percent: that is 4,200 dollars a year in interest or lost earnings. Put it all in one column and divide by acres or hours. This is the number to hold up against a custom rate. University Extension custom-rate surveys show what hired work usually costs in your area, and rates vary by region and year.

Common mistakes

The biggest error is setting salvage value too high, which hides the real cost. The second is ignoring interest. The third is using tax depreciation as if it measured real wear. Another is forgetting that a low-hour machine can still lose value from age and obsolescence. Keep a one-page sheet per machine with purchase price, hours, repairs paid and the date you last checked market value. Update it each winter. Ask your accountant how current tax rules apply, since they change and differ from these budgeting methods. Redo the sheet each winter with actual repair bills and hours, and your estimates will get closer to the truth every year.

Find providers near you

Pick your state to see vets, custom operators, dealers, elevators and other farm services.

Keep reading