Farm service guides and a state-by-state directory for farmers and ranchersA farm.FM network site · Farm news →
AgServicesDirectoryWho to call, state by state
Home › Guides › Worksheets, Checklists & Calibration Guides › Custom Spraying Licenses and Safety…

Custom Spraying Licenses and Safety Checklist

Hiring someone to spray your crops puts a license, insurance, and drift risk on your farm. Check these items before the rig pulls into the field.

Worksheets, Checklists & Calibration Guides3 min read709 words

In short

  • Verify the license category and current status with the state agency, not just the paper.
  • Put field, product, rate, price, and responsibilities in a written work order.
  • Keep the application record, with weather, for every field that gets sprayed.

Why the license matters to you

When a custom applicator sprays your field, the product label, the drift, and the records all touch your operation. In most states a commercial applicator must hold a license or certification issued through the state department of agriculture or a similar agency, and applying restricted use products requires added certification. Rules vary by state, so look up the requirements on your state agency's website or call the pesticide bureau. Ask to see the license, check that the category matches the work, such as ground application or aerial, and confirm it is current. A short phone call to the agency can confirm a license lookup when the paper looks old.

Ask for the paperwork before the job

Request a certificate of insurance, and read what it covers. Many farmers want liability coverage that includes drift and crop damage, but policies differ and some exclude pesticide work. Ask your own insurance agent how custom application is treated on your side. Get a written work order naming the fields, acres, product, rate per acre, target pest or weed, and the price. Include who buys the chemical, who is responsible for mixing, and who pays for a respray if rain washes the product off. Keep everything in the same folder as your field records. A handshake is fine for the coffee, not for the chemical.

Label and weather checks

The label is the law, and the applicator is expected to follow it. Walk through the points that matter to your field. What is the rate range? What is the preharvest interval and the restricted entry interval? Are there buffers for water, wells, or sensitive crops? What wind speed limits and temperature limits apply? Ask the applicator how they decide when to shut down for wind and inversions, and whether they record wind speed and direction at the time of spraying. Ask where nearby sensitive crops, beehives, gardens, and homes are on your farm, and mark them on a map. Check with your state agency for any local drift or notification rules.

Field-day safety checklist

Before the first pass, walk the field with the operator. Mark the wellheads, ponds, ditches, and drain tiles. Point out overhead lines. Confirm gates and field access, and tell the operator about any workers or family who might be nearby. Post or notify as required for the product and your state's rules. Confirm that there are eye-wash water, clean water, and spill supplies on the rig, and ask where the safety data sheet for the product is kept. If you are mixing or loading yourself, wear the protective equipment that the label lists, not the gear that happens to be in the truck. Keep kids and pets out of the area.

Records you each keep

Both of you should have a record of the application. Typically that includes the date, location, product name, registration number, amount applied, rate, target pest, applicator name and license number, and weather conditions. Federal rules require records for restricted use products, and many states require more, so ask your state agency what applies to you. Ask for a copy of the record within a few days of the job. If a neighbor calls with a complaint two months later, these pages are what you will be reaching for. Store them where you can find them, in the file or on the computer, with the field name on top.

Mistakes to avoid

Do not hire on price alone. Do not let the applicator spray in marginal wind because the schedule is tight, since you carry the consequences too. Do not skip the written work order because you have known the family for years. Do not forget the preharvest interval when you plan harvest dates. Do not leave empty containers or rinsate for someone else to figure out; ask how that is handled under state rules. If something goes wrong, call the applicator, your insurance agent, and the state agency, and write down what you saw with photos before the field changes.

Find providers near you

Pick your state to see vets, custom operators, dealers, elevators and other farm services.

Keep reading