In short
- Test fence voltage at several points and write down every reading.
- Check grounding and walk the line for shorts after storms and growth.
- Log repairs, costs and supplies used so you can plan before the busy season.
What belongs in the log
Fence equipment includes chargers, grounding systems, insulators, gate hardware, post drivers, stretchers, pliers, wire reels and the vehicles used for fence work. Make a page for each item or group. Record the date, what was checked, what was found, what was done and what is needed next. Also note the location of fence lines, such as the north pasture or the creek lane. A log tells you which fence fails every spring, which charger is wearing out and which tool is overdue for a replacement.
Chargers and power
Check the manual for the model, its energizer rating and the recommended maintenance. Inspect the charger case, cords, fuses and mounting, and keep it dry and protected. For solar chargers, wipe the panel, check the battery and note winter performance. Test the fence voltage with a meter at several points, starting near the charger and ending at the far end, and write the readings in the log. A sudden drop in voltage means a short, bad insulators or vegetation on the line. Follow the manufacturer's safety guidance for working on powered fence.
Grounding and shorts
Poor grounding is a common cause of weak fences. Check ground rods for tightness, corrosion and clean connections, and record the spacing and number. In dry weather, test the fence voltage and check the ground by measuring voltage on the ground rod, following the instructions from the charger maker. Walk the line to look for shorts: vegetation, broken insulators, loose wires touching posts and downed branches. Clear and repair as you go, then log what you did. Walking a mile of fence is cheaper than gathering a mile of escaped cows.
Wire, posts and gates
Look at tension, rust, splices, staples, braces and corners. Corners and ends take the most load, so inspect them first. Record posts that are leaning, rotten or heaved from frost. Check gate latches, hinges and chains, and note which ones need replacing. Keep a running count of how many posts, insulators and clips you replaced, so you can order supplies before a busy season. Mark trouble spots with flagging so you can find them again.
Tools and vehicle gear
Check pliers, stretchers, drivers and wire spinners for wear, and sharpen or replace what is dull or damaged. Inspect post drivers for loose handles or damaged hydraulics. Check hoses, pins and hitch points on any attachment, and grease according to the manual. Store tools dry and in one place. Note the date of any repair or replacement, and the cost, which helps with tax records and budgets. Wear gloves and eye protection when driving posts or cutting wire.
Set a schedule
Plan checks by season: before turnout in spring, after heavy storms, mid-summer when vegetation is high, and before winter. Keep the log on a clipboard in the shop or in a phone note, and let hired help add to it. Review the log each season to see patterns. If a fence line needs constant repair, consider whether a rebuild is cheaper than patching. For contract fence builders or electricians, use the state pages of the directory on this site to look up providers, and verify licenses and references before hiring.
Safety and neighbor matters
Electric fence is built to startle, not to injure, but follow the charger manual and local rules, and post warning signs where the public may touch it. Never connect a charger to the line in a way the maker does not allow, and keep fence wire away from power lines and from other utility wires. Keep gates and fence corners marked. If a fence is shared with a neighbor, check your state's fence law and your agreement about who maintains which part, and write down any changes you both agree on. Good fences make good neighbors, and a good log proves who fixed what.
Find providers near you
Pick your state to see vets, custom operators, dealers, elevators and other farm services.
