Farm service guides and a state-by-state directory for farmers and ranchersA farm.FM network site · Farm news →
AgServicesDirectoryWho to call, state by state
Home › Guides › Worksheets, Checklists & Calibration Guides › Farm Fencing Contractor Bid Comparison

Farm Fencing Contractor Bid Comparison

Fence bids that look alike on the total can hide very different work. Compare what each contractor includes, the materials, and who carries the risk.

Worksheets, Checklists & Calibration Guides3 min read668 words

In short

  • Write one spec and give it to every bidder so the totals can be compared.
  • Look at corners, braces and gates first, because that is where fences fail.
  • Hold the last payment until every item on your walkthrough list is fixed.

Get bids on the same specifications

Before you call anyone, write a simple spec so each contractor bids the same job. Include the length in feet, the purpose (cattle, sheep, horses, deer or boundary), the fence type, the height, line post and corner post material, post spacing, wire or panel gauge, gates and their widths, and whether the line must be cleared. Mark the route with flags or paint and walk it with each bidder. Three bids are a sensible target. A bid that differs from the rest by a lot usually means a different scope or a different set of materials, not a bargain or a ripoff.

Compare the line items

Ask each contractor to break the bid into materials, labor, clearing, gates, equipment mobilization and any hauling. Compare line by line. Take a simple example: if one bid totals 12,000 dollars for 2,000 feet and another 15,000, that is 6 dollars and 7.50 per foot. Before deciding the cheaper one wins, check whether the posts are treated and what diameter, and whether the cheaper bid uses fewer braces or wider spacing. Ask who supplies materials, who hauls them and what happens if more are needed. Rates and costs vary widely by region, so Extension and local lumber yards are good reality checks.

Look hard at corners, braces and gates

Most fences fail at the ends, corners and gates, not in the middle of the run. Ask how corner and end assemblies will be built, the post size and depth, the brace type and the wire used. Ask how deep line posts will be set and whether they are driven or set in holes. For gates, ask about hinge hardware, the gate post size and whether gates are included or priced separately. A heavy gate on a light post will sag within a year, and the sag gets blamed on you. Ask to see a fence they built a year or two ago.

Check insurance, licensing and references

Ask each contractor for proof of liability insurance and, where they have employees, workers' compensation. Ask your state about contractor registration or licensing for fence work, since rules vary, and check with your state department of agriculture or licensing board. Ask for references from jobs similar to yours and call at least two. Ask the references whether the contractor showed up when promised, whether the price changed, how the fence looks now and how they handled problems. A contractor who refuses to give references or insurance paperwork has answered your question.

Put it in writing

A written contract should list the scope, materials with sizes and grades, length, gate count, start and finish dates, price, payment schedule, and who handles utility locates, permits and property line questions. Make sure it says what happens when the weather, rocks or ground conditions change the work. A reasonable payment schedule ties payments to progress rather than paying most of it upfront. Include a clause about cleanup and about a written change order for any added work. Add a warranty for workmanship and ask what it covers. Review the contract with your attorney if the job is large. Contract rules vary by state.

Inspect before the final payment

Walk the full fence with the contractor. Check that posts are plumb and set to the depth specified, wire is tight and evenly spaced, braces are tight, gates swing and latch, and staples are set. Look for stray wire, cut ends and discarded posts left in the pasture, which can hurt livestock. Compare the work to the contract line by line. Withhold the last payment until you are satisfied and any punch list is complete. If you shared a boundary, confirm in writing with the neighbor which fence is whose. Look up fence contractors in your state in the directory.

Find providers near you

Pick your state to see vets, custom operators, dealers, elevators and other farm services.

Keep reading