Farm service guides and a state-by-state directory for farmers and ranchersA farm.FM network site · Farm news →
AgServicesDirectoryWho to call, state by state
Home › Guides › Land, Fencing & Construction Services › Pond and Waterway Construction

Pond and Waterway Construction

Ponds, terraces and grassed waterways can hold water and soil in place, but only if they are designed and built right. Here is how to hire for it.

Land, Fencing & Construction Services3 min read686 words

In short

  • Check soils, drainage area and permits with NRCS, the conservation district and the state before building.
  • Get a real design for spillway, core trench and outlet, not a verbal plan.
  • Seed and protect bare ground right away and inspect after the first big rain.

Start with the purpose and the site

A pond can supply livestock water, fish, irrigation, fire protection or recreation. A waterway moves runoff across a field without cutting a gully. Each needs a site that suits it. For a pond, you need soil that holds water, enough drainage area to fill it and not so much that a flood overwhelms it. Your county office of the USDA Natural Resources Conservation Service and your local conservation district can help you check soils and the site. Many offer technical help or design standards, and some cost share programs may apply. Check before you hire anyone.

Permits and water rules

A pond or waterway can trigger permits, depending on the size, the stream or wetland nearby and the dam height. Many states regulate dam safety above certain heights or storage volumes, and downstream landowners may have legal interests in water flow. Check with your state natural resources or environmental agency, your county and the Corps of Engineers if wetlands or streams are involved. Water rights rules differ across states, so confirm what applies to you before any dirt moves. Starting without a permit can mean being told to remove the work.

Design before dirt

A good contractor works from a plan. For a pond, that means dam height, top width, side slopes, an overflow spillway, a drain or pipe and a core trench to key the dam into good clay. For a waterway, it means width, depth, grade, outlet protection and seed mix. Ask who designs the structure and whether a stamped or agency-approved design is available. Volume is measured in acre-feet, and one acre-foot is 43,560 cubic feet. A pond one acre in surface and averaging 6 feet deep holds roughly 6 acre-feet at best, though shaped sides mean the real figure is smaller.

Hiring an earthwork contractor

Look for a contractor who has built farm ponds and waterways in your area, not just done general dirt work. Ask for references and visit finished ponds that are a few years old. Look for leaks, erosion on the dam face and a spillway that works. Ask about equipment, compaction methods, and testing of the fill. Compaction in thin layers matters for a dam. Confirm insurance and licensing where required. Ask how they price: by the hour, by cubic yard moved or as a lump sum, and what happens if conditions are worse than expected.

Contract, price and cost share

Bids should list the quantity of earth moved, spillway and pipe materials, topsoil handling, seeding, mulching and cleanup. Ask for a written schedule, since wet weather stops this work. Get at least two or three bids. Ask your conservation office whether the work qualifies for cost share and what steps must come first. Many programs will not pay for work already started, so wait for approval. Costs vary with soil, access and distance, so treat any published figure as a rough guide only.

After construction

Seed bare ground right away and protect it with mulch or straw so rain does not wash it out. Fence livestock off new dams and waterways until grass is established. Inspect after the first heavy rain for seepage, slumping and cuts at the outlet. Keep trees off the dam, since roots create leak paths. Mow waterways to keep grass dense. Keep your design, permits and photos on file. Ask the contractor to leave you a sketch of the finished pond showing dam top elevation, spillway location and the pipe and drain. Years from now, when a muskrat tunnel or a wet spot shows up on the dam face, that sketch tells you where the core trench and pipe sit. Also ask about stocking and water quality only after the pond has filled and settled, and check with your state fish and wildlife agency on any fish stocking rules.

Find providers near you

Pick your state to see vets, custom operators, dealers, elevators and other farm services.

Keep reading