In short
- Walk through animal flow with the builder and visit a finished job before you sign.
- Check manure, setback and permit rules with the state agency before the plans are final.
- Compare bids line by line and put every change order in writing.
Start with the animals, not the building
Before a builder sets a stake, think through how animals move: where they enter, where they sort, where they load, where they calve or farrow, and where a sick one gets pulled out. Builders who have only done machine sheds may draw a handsome building that works poorly with a hot cow in it. Ask each candidate to show you livestock facilities they have built, and then call the owners. Ask the owners whether the alley widths, gate swings, chute placement and flooring have worked day to day. Ask what they would change. That one phone call usually tells you more than a brochure.
Design help and where to find it
University Extension offices and many state ag departments publish plans and design guidance for handling systems, ventilation, manure storage and housing. Ask whether your builder works from those references or from their own sketches. For dairy, swine and poultry, the housing and ventilation design can be a specialty of its own, and some manufacturers provide engineered plans. A veterinarian who works with your herd can also tell you what has hurt animals in other barns, such as slick floors or poor airflow. Bring that advice to the builder before the plans are final, because changing a concrete pour is expensive.
Concrete, footing and drainage
Floors and drainage are where livestock buildings succeed or fail. Ask about the concrete thickness, reinforcement, surface texture, slope to drains and where wash water and runoff go. A smooth floor looks clean and can lame cattle, while a rough one can wear hooves and teats. Ask how the builder handles the subgrade, since a soft or poorly compacted base cracks slabs. Frost depth, wind load and snow load requirements for posts and footings vary by place, so check with your county building office or Extension on what applies where you farm.
Environmental and manure rules
New or expanded livestock facilities can trigger rules on manure storage, setbacks from wells and waterways, and in some cases permits based on herd size. These rules vary by state and sometimes by county, and they change. Call your state department of agriculture or environmental agency before the plans are drawn, and ask what a facility of your size needs. Ask your builder whether they have worked through those approvals before and who prepares the paperwork. Your local conservation district or USDA service center may also be able to explain technical help and cost-share programs that can apply to manure and runoff structures.
Comparing bids
Three bids for a livestock building often differ in what they leave out. Line them up by item: site work, concrete, framing, roofing, stalls or pens, gates and headgates, ventilation, water and electric, and cleanup. Ask who supplies the steel and equipment and what brand. Ask what happens if the soil turns out worse than expected. A low number that excludes electrical and water is not a low number. Ask each builder for references on jobs of similar size, and ask how they handle punch-list items after the crew has moved on.
Putting it in writing
The contract should name the plans, materials, start and finish dates, payment stages and who obtains the permits. Ask for a lien waiver from the builder and from major suppliers as you pay. Confirm that the builder carries liability and workers compensation coverage, and ask your own insurance agent how a new building and the animals in it will be covered during construction. Rules on insurance and liens vary by state. Keep every change in writing, signed by both sides. Look up your state in the directory for builders and engineers who work with livestock.
Find providers near you
Pick your state to see vets, custom operators, dealers, elevators and other farm services.
