In short
- Check capacity with the manufacturer chart, since the cylinder math is only a rough guide.
- Verify who engineers the foundation and who stands behind the warranty.
- Keep bins clear of power lines and follow grain entrapment safety guidance.
Size the bin from your own numbers
Start with how much you need to store and how fast you need to move it. A round bin holds roughly the volume of a cylinder, and a bushel is about 1.244 cubic feet. As a worked example, a 30 foot diameter bin has a floor area of about 707 square feet (3.1416 times 15 times 15). Filled level to 24 feet, that is about 16,965 cubic feet, which divided by 1.244 comes to roughly 13,600 bushels. Peaked grain on top adds more. Treat that as a rough check and use the manufacturer's capacity chart for your exact bin and grain. Think about harvest rate too, because a bin you cannot fill fast enough is a bottleneck.
Choosing a builder and brand
Many bin builders are authorized dealers for a manufacturer, and the manufacturer provides engineering and warranty. Ask whether the crew works for the dealer or is a subcontractor, how many bins they have built, and what they have built in your region. Ask for references from owners who have used the bin through a few seasons. Call them. Ask how the builder handled delays, weather and problems. Confirm insurance, including workers' compensation, because working at height is hazardous. Ask for a copy of the manufacturer's installation requirements, and read what the warranty requires of you.
Foundation, aeration and drying
The foundation carries a huge load, so ask who designs it and whether soil conditions were tested. Ask for the engineered plans and the concrete specs. Aeration and drying equipment need to match the bin and the grain you handle. Ask about fan size, airflow in cubic feet per minute per bushel, floor type, stirring equipment and temperature cables. Use manufacturer charts and your Extension grain-storage specialist to choose airflow for your crop and moisture. Ask about the power supply too. Fans and dryers draw serious electricity, and a utility upgrade can add cost and delay, so call the electric supplier early.
Permits, setbacks and safety
Check with the county about permits, setbacks and any building rules that apply. Distance from property lines, roads and overhead power lines matters, and so does access for trucks and augers. Keep bins well clear of power lines, because contact with lines is a leading cause of grain handling accidents. Ask the builder about ladders, platforms, lighting, lockout points and entry safety. Grain entrapment is a real hazard, and OSHA and university Extension offices publish safety guidance for working in and around bins. Rules vary by state and by farm size, so confirm what applies to you and any hired workers.
Bids, payment and scheduling
Ask for itemized bids that list the bin, floor, fans, heaters, sweeps, unloading equipment, leg and conveyors, concrete, electrical and erection. Compare these line by line. Find out who handles delivery, unloading the steel and the crane. Ask for a schedule and a plan for what happens if it slips past harvest. A bin that is not ready in the fall can cost more than a few extra dollars in the bid. Tie payments to delivery and construction milestones, and avoid paying most of the money before the material arrives.
Inspection and first fill
Before final payment, walk the bin. Look at the roof bolts, sheet seams, sealing, doors, ladder, vents and aeration. Check that the floor is level and the fans run. Ask the builder to start every motor and show you the controls. Keep manuals, warranty papers and plans in one file. Fill the first load carefully and watch for settling and moisture trouble. Schedule an inspection after the first season to catch loose fasteners.
Find providers near you
Pick your state to see vets, custom operators, dealers, elevators and other farm services.
