Farm service guides and a state-by-state directory for farmers and ranchersA farm.FM network site · Farm news →
AgServicesDirectoryWho to call, state by state
Home › Guides › Land, Fencing & Construction Services › Irrigation System Installation…

Irrigation System Installation Contractors

Putting in a pivot, drip system or pump takes planning around water rights, power and soil. Here is how to hire an installer and check the work.

Land, Fencing & Construction Services3 min read638 words

In short

  • Confirm water rights, well permits and power supply before you request a quote.
  • Check system capacity with simple arithmetic against your crop's peak water need.
  • Insist on a startup test, a catch-can check and written pressure and sprinkler settings.

Settle water and power first

Before you talk equipment, find out what water you can legally use and how much. Water rights, well permits and use limits are set by state or local agencies, and rules differ widely, so check with your state water resources agency, your groundwater district or your Extension office. Then find out what power or fuel is available. A pump and pivot can draw a lot of electricity, and bringing in three-phase service can cost more than the system itself. Ask the electric supplier for a written estimate and timeline. A reputable installer will ask about both before quoting.

Match the system to the field

Center pivots, linear moves, drip tape, big guns and flood irrigation each fit different crops, soils and field shapes. Ask the installer to explain why they recommend one. Tell them about soil texture, slope, crop mix and field size. Ask about application rates, because water applied faster than the soil can take it runs off. Here is a simple check on capacity. One acre-inch is about 27,154 gallons. A 130 acre field with a 1,000 gallon per minute well needs 130 times 27,154, about 3.53 million gallons, to get one inch, which is roughly 59 hours of pumping. Use that kind of arithmetic to see if the system matches the crop's peak water need.

Dealer, installer and who stands behind it

Many installers are dealers for a manufacturer. Ask who does the design, who handles the pump and power work, and who does service after the sale. Ask how long they have been installing in your county and for references from growers with similar crops. Call them and ask how the system performed in its first dry stretch. Confirm insurance, any contractor or well driller licensing your state requires, and who carries warranty on pipe, pump and electrical. Ask whether parts are stocked locally, because a broken part in July is not the time to wait for a shipment.

What the quote should include

An irrigation quote should itemize pump, motor, drive, pipe, tower and sprinkler package, control panel, power connection, trenching, well work, backflow and chemigation protection if needed, and startup. Ask for a sprinkler package chart showing flow, pressure and coverage. Ask whether the price includes a design for your pressure and flow, not a generic layout. Compare bids on those details. Check whether freight, crane, concrete pads and permits are in or out. Ask about a pump test, since the actual well output decides what the system can do. Rules for chemigation and backflow prevention vary by state, so confirm with your state agriculture department.

Startup, testing and training

After installation, ask for a startup walk through. The installer should run the system, check pressure at the pivot point and at the end, and measure flow. Do a catch-can test, which lays out cans across the field to check how evenly water is applied. Ask for a written record of the pressure settings and sprinkler package. Learn the control panel, the safety shutoffs and winterizing steps. Keep the manuals and warranty. Your Extension irrigation specialist or the local conservation district may help with scheduling and efficiency checks.

Maintenance and long-term service

A good system still wears out in predictable places: gearboxes, tires, sprinklers, seals and the pump. Ask for a maintenance schedule in writing. Check oil, bolts and sprinkler nozzles on a routine. Ask whether the dealer offers a service contract and what response time to expect during the growing season. Keep records of pump hours, power bills and yields. If output falls, test the well before you blame the equipment.

Find providers near you

Pick your state to see vets, custom operators, dealers, elevators and other farm services.

Keep reading