Farm service guides and a state-by-state directory for farmers and ranchersA farm.FM network site · Farm news →
AgServicesDirectoryWho to call, state by state
Home › Guides › Land, Fencing & Construction Services › Greenhouse Construction Services

Greenhouse Construction Services

Building a greenhouse is a different job from building a machine shed, and hiring the wrong crew costs you in heating bills and crop losses for years afterward.

Land, Fencing & Construction Services3 min read701 words

In short

  • Describe crop, season, size and utilities in writing before you ask for bids.
  • Know who is responsible for the foundation, utilities and permits before you sign.
  • Pay by finished stage and test the heating and ventilation before the last payment.

Decide what the structure has to do first

Before you call anyone, write down what will grow inside, in which months, and how much heat, cooling and humidity control you need. A hoop house for early tomatoes and a gutter-connected house for year-round transplants are very different buildings with very different price tags. Ask yourself how much snow and wind the site sees, whether you need electricity and water at the door, and whether you plan to add bays later. Contractors can only bid what you can describe. A one-page description of crop, season, size, utilities and future expansion will get you bids you can actually compare instead of three numbers that mean three different things.

Kit supplier, erector or general contractor

Most greenhouses come as a kit from a manufacturer, and the real question is who puts it together. Some manufacturers have their own erection crews. Some sell only the kit and leave you to find a local builder. Others sell through dealers who handle foundation, erection and utilities. Ask each one who is responsible if the frame is out of square, if the glazing leaks, or if the heater arrives and the gas line is not ready. One name on the contract for the whole job is easier to hold accountable than five people pointing at each other. If you split the work, you become the general contractor, and that is a real job.

Site work and foundation

Drainage and ground prep decide whether a greenhouse lasts. Ask the builder how they handle grading, runoff from the roof, posts or footings below frost depth, and the pad for any heaters or fans. Ask whether a soil test or a look at the water table is part of the bid. Poor drainage turns a floor into a mud pit and rots wood near the ground. Frost depth and footing requirements vary by location, so confirm the local requirement with the county building office or your Extension office rather than trusting a salesperson's memory.

Covering, ventilation and heat

Glazing choices include polyethylene film, polycarbonate panels and glass, and each has a different life span, light quality and replacement cost. Ask for the manufacturer's stated service life and what the warranty actually covers, since film warranties often exclude wind damage and handling. Ventilation matters as much as heat. Ask how many air exchanges the fan and vent design is built for, and have the builder show you the sizing from the manufacturer's data. Ask about fuel type, backup power for fans and heaters, and who wires them. A greenhouse with a good heater and no backup generator is one power outage away from a bad week.

Permits and agricultural exemptions

Some states and counties treat greenhouses used for farming as agricultural buildings with lighter permit rules, while others require full building permits, electrical inspections or setbacks. Rules vary by state and county, so call the local building department before you sign and ask what applies to your use. Ask who pulls the permits and who pays for them. A builder who says you do not need one should be willing to say so in writing. If the answer turns out wrong, the stop-work order lands on the landowner, not the contractor.

What belongs in the contract

Get the scope, the make and model of the structure, the glazing, the utilities included, the start and finish dates, and the payment schedule in writing. Tie payments to finished stages, not to calendar dates, and hold back a final payment until the heater, fans and controls have run through a real cold or hot day. Ask for the warranty terms on the structure and on workmanship separately. Keep the manufacturer's manuals, the model numbers and the installation photos. If you are borrowing for the project, ask your lender whether it wants to see the contract or a lien waiver before releasing funds. Look up your state in the directory for builders and suppliers who work with farm structures.

Find providers near you

Pick your state to see vets, custom operators, dealers, elevators and other farm services.

Keep reading