Farm service guides and a state-by-state directory for farmers and ranchersA farm.FM network site · Farm news →
AgServicesDirectoryWho to call, state by state
Home › Guides › Land, Fencing & Construction Services › Erosion Control Contractors

Erosion Control Contractors

Soil that washes off a field or a construction site is gone for good, and the right contractor can keep it in place with practices that fit your ground.

Land, Fencing & Construction Services3 min read646 words

In short

  • Get technical advice from the conservation district before you hire anyone.
  • Talk to the cost-share agency before starting work, not after.
  • Put seeding, rock size and first-year repair in the contract.

Where erosion shows up

Look for rills and gullies in cropland, bare banks along ditches and streams, washouts below culverts, silt on the low end of a field, and muddy water leaving a building site after a storm. The cause is usually water moving too fast across bare or steep ground. Before you hire anyone, ask your Extension office, soil and water conservation district or the USDA service center to look at the problem. They can often explain which practices fit your soil and slope and what the typical options are.

Practices a contractor may build

Common structures include grassed waterways, terraces, diversions, water and sediment control basins, grade stabilization structures, rock-lined channels, and silt fence or straw wattles on construction sites. Cover crops, residue management and no-till are farming practices rather than contractor work, but they cut erosion on the same ground. Ask the contractor which practice they recommend for your problem and why. Ask to see similar jobs, preferably two or three years old, and see how they held up after heavy rain. Ask the owners whether the contractor came back to fix anything and how long that took. A waterway that has gone through two or three wet springs tells you more than any quote. A structure that looks neat on day one and blows out in a year was poorly built.

Plans, standards and cost-share

Many cost-share programs require that practices be built to a published technical standard and checked by program staff. If you plan to apply for help, talk to the local conservation district or the USDA service center before any work starts, because starting early can disqualify the practice. Ask your contractor whether they have built practices to those standards and worked with that staff. Program rules, payment rates and sign-up times vary, so get current information from the agency itself. A design signed off by the technical staff protects your investment and your payment.

Seeding, rock and timing

Many erosion jobs fail on the finishing details. Ask what seed mix the contractor will use, how it will be applied, whether it will be mulched or covered, and when. Seeding at the wrong time of year or into dry ground leaves bare soil exposed to the next storm. Ask where the rock comes from and what size it is, since small rock washes out. Ask how long the contractor will keep an eye on the establishment of grass and whether they will reseed failed spots. Plan the work for a time of year when vegetation can get started.

Permits and downstream effects

Earthwork near streams, wetlands, ditches or on sites above a certain size can require permits or stormwater plans. Rules differ by state and county, so check with the state environmental agency, the county and the conservation district. Ask the contractor who prepares that paperwork. Think about where the water goes once it leaves your structure. A new waterway that dumps into a neighbor's field is a problem, not a fix. Ask the designer to walk the outlet with you and confirm it is stable.

Contracts and follow-up

Put the design, materials, quantities, seed mix, dates and price in the written agreement, and add who maintains the structure in the first year. Ask for liability coverage. Keep photos from before, during and after, along with the as-built drawings. After the first large rain, walk the site and check inlets, outlets and rock. Report any failure promptly while the contractor is still on the hook. Mow or maintain waterways as the designer advises, and keep tillage and sprayers off the sod. Look up your state in the directory for erosion and conservation contractors.

Find providers near you

Pick your state to see vets, custom operators, dealers, elevators and other farm services.

Keep reading