In short
- Site the rain gauge and temperature shield in open, level, shaded-from-heat spots.
- Buy sensors only for decisions you actually make, and ask for each one's accuracy.
- Clean and check the station on a set schedule, and compare it against a manual gauge.
What a station is for
Radar and forecast apps cover your county. A station on your own farm tells you what happened in your own field: rain that fell on your side of the road, frost in the low ground, wind at spray time. That local record is useful for spray decisions, irrigation scheduling, disease models, planting and harvest timing, and settling arguments about how much rain you got. It also builds a history for insurance conversations and crop adjusters, though the weight of that record depends on the claim rules, which you should confirm with your agent.
Choosing a spot
Place the rain gauge on level ground, in the open, away from trees, buildings and tall crop. A common rule of thumb is to sit it at a distance of at least two to four times the height of the nearest obstruction, though your manufacturer manual will say what it prefers. Temperature and humidity sensors need a ventilated shield, clear of buildings, gravel roads and pavement, which hold heat. Wind sensors want open exposure and as much height as practical. Do not mount everything on the shop roof and expect field numbers. Ask the installer to explain the siting choices out loud.
Sensors worth having
At minimum most farms want rainfall, air temperature, humidity and wind speed and direction. Add soil moisture and soil temperature probes if you irrigate or plant early. Leaf wetness sensors help with disease models in fruit and vegetable crops. Solar radiation matters for water use estimates. More sensors mean more upkeep, so choose by decision. If you do not make a decision with a number, skip the sensor. Ask for the accuracy of each sensor in the product specification, and how often each should be checked.
Calculations you will see
Many stations report growing degree days. The simple method averages the daily high and low and subtracts a base temperature. With a high of 80, a low of 60 and a base of 50, the average is 70 and the day adds 20 degree days. Crop models often cap very hot days and lift very cold ones, so use the method recommended by your state Extension service for your crop. Stations also report dew point, evapotranspiration and delta T. Ask the provider what each means and which one your spray label or irrigation plan uses.
Data access and ownership
Find out how data leaves the station: cell, Wi-Fi or radio, and how often. Ask who owns the data, whether you can export it as a file, and whether it appears on a public network. Ask whether the service fee covers the data plan or whether that is separate. Make sure the station can link to your farm software if you want that.
Care and checks
Rain gauges clog with dust, bugs and bird droppings. Clean the funnel on a schedule and test the tipping bucket by pouring a measured amount of water through slowly, as the manual describes. Replace batteries before cold weather. Compare readings against a cheap manual gauge and a nearby official station once in a while. Document the install date, sensor heights and any changes, so you can interpret old records later.
Mistakes to avoid
The most common error is putting the station where it is easy to reach and not where it reads true. A rain gauge under an eave, a thermometer in direct sun or a wind sensor behind the barn will give numbers that look exact and are wrong. Another is forgetting to log changes, such as a moved sensor or a new battery. Do not use one season of readings to judge a microclimate. Compare with the nearest official station and write down the differences you see. Farmers who check their station against a coffee can marked with a ruler tend to catch problems early.
Find providers near you
Pick your state to see vets, custom operators, dealers, elevators and other farm services.
