In short
- Get a written parts list and a calibration record with the quote.
- Run a pass-to-pass overlap test before the technician leaves.
- Ask about subscription costs and support hours before buying.
Who does installs
Precision installs are done by equipment dealers, independent precision ag shops, and some farm electronics specialists. A dealer usually knows its own brand best and can tap factory support. An independent shop often works with mixed fleets and can be faster in a rush. Ask which brands and models they install and how often. Installing a receiver on a late-model tractor with a factory-ready harness is a different job from retrofitting a twenty-year-old sprayer. Ask for the name of the technician who will actually do the work, and how many of this exact install he or she has done.
What a good scope of work includes
A scope of work should list every component: receiver, display, steering kit, wiring harnesses, rate controller, sensors, and any software licenses. It should say who supplies each part and whether the price includes labor, travel, and a test run. Ask about mounting locations. A receiver should sit where it has a clear sky view and a solid mount, and the cables should be routed away from heat, moving parts, and pinch points. Ask whether the install includes calibration, and if so, what calibration steps the tech performs and records.
Correction signals and subscriptions
Guidance accuracy depends on the correction signal. Some signals are free but less precise from year to year. Others, such as RTK, are tighter, and need either a base station on your farm or a network subscription. Ask what the installed system will use, what the subscription costs per year, and what coverage exists in your area. A tower on the edge of your coverage may drop out in the hills. Ask what happens if the subscription lapses, and who owns the base station if you buy one. Put those answers in writing.
Testing before the tech leaves
Do not accept the job until you have seen it work. For steering, run an AB line across a field and check the pass in both directions, then do an overlap test to see whether adjacent passes meet. For monitors and rate controllers, run a test with the implement on and verify the display numbers against a known quantity. Ask the technician to set up and save your implement dimensions, offsets, and vehicle profile, and write them on a sheet you keep in the cab. Take photos of the wiring and connectors so you can talk to support later.
Warranty, support, and downtime
Ask about warranty terms on parts and labor, and who you call at seven in the morning during planting. Ask how long a service call takes during the busy season. Find out whether the installer will train your operators, because the best hardware is wasted if nobody knows how to load a job. Check your equipment manufacturer's rules, since some warranties can be affected by third-party wiring. A dealer or the manual will tell you where the line sits. Keep the paperwork where you can find it.
Mistakes that cost money
The common problems are cheap mounts that shift, harnesses spliced into the wrong circuit, ground faults, and settings that were never saved. Another one is buying the display and skipping the training. Compare installers on total cost, including subscriptions and updates, not just the sticker price. Ask your neighbors who they use and what went wrong. Winter is the best time to schedule an install, since the shop is slow and you have time to test before planting.
Before planting season hits
Do the work in winter if you can, and keep a short checklist: receiver mounted, harness tested, display updated, offsets saved, signal active, and operators trained. Run everything once in the shop and once in a field. Keep spare fuses, a few connectors, and the support phone number in the cab. Check software updates against the manufacturer's notes before installing them, since an update in the middle of planting can change menus or settings. Note the serial numbers of every part, and keep them with your receipts.
Find providers near you
Pick your state to see vets, custom operators, dealers, elevators and other farm services.
