Farm service guides and a state-by-state directory for farmers and ranchersA farm.FM network site · Farm news →
AgServicesDirectoryWho to call, state by state
Home › Guides › Trucking, Hauling & Logistics › Refrigerated Transport for Produce

Refrigerated Transport for Produce

Fresh produce is only as good as the temperature it holds on the road, so learn what a reefer does, what it cannot do, and how to hire one.

Trucking, Hauling & Logistics3 min read698 words

In short

  • Cool the product first, because a reefer holds temperature but cannot remove field heat.
  • Confirm a pre-cooled trailer, written setpoint, and a data logger inside the load.
  • Document temperature at loading and keep records to answer any rejection claim.

What a Reefer Actually Does

A refrigerated trailer, or reefer, holds temperature. It does not cool down hot product. Produce that goes in warm will come out warm, or worse, because the unit cannot pull field heat out of a full load. That is why growers cool product after harvest, using methods suited to the crop, such as hydrocooling, forced air, or room cooling, before loading. Ask your state Extension postharvest specialist for the target temperature and handling guidance for each crop, since needs differ widely. Some fruits and vegetables suffer chilling injury if kept too cold, and others spoil quickly if held too warm. Setting the unit correctly matters as much as having one.

Pre-Cool the Trailer and the Product

Request that the carrier pre-cool the trailer to the target temperature before it reaches your dock. A warm, empty box takes a long time to drop, and loading into it starts a loss you cannot see. Check the reefer unit is running and set to the right mode, either continuous or cycle, as the shipper requires. Continuous running keeps air moving, which many produce loads need. Confirm the setpoint in writing. Load the cooled product quickly, ideally through a dock seal, and keep the doors closed as much as possible. Do not stack pallets so tightly against walls that air cannot move around the load.

Pack and Load for Airflow

Refrigeration works by moving air through and around the load. Use cartons with vent holes that line up when stacked, and follow the loading pattern recommended for your packaging. Leave space between the load and the trailer walls and the front bulkhead, and do not block the return air path at the back. Place a temperature recorder or data logger in the load, not just rely on the unit display, because the display shows air at the unit rather than product temperature. Ask your buyer or packaging supplier for guidance on pallet patterns. A well-built pallet in a poorly loaded trailer still fails.

Verify Temperature and Cleanliness

Before loading, inspect the trailer for odor, standing water, damaged floor, and residue from earlier loads. Food safety rules require carriers to keep equipment sanitary and suitable for food, and shippers have responsibilities too, so ask your state department of agriculture or the federal food safety guidance what applies to your operation. Check the unit's log or pretrip record, and ask whether the trailer last carried anything that could leave odor or contamination. Record the product temperature at loading and the setpoint. Take photos of the load and of the unit display. These records protect you if the receiver rejects the load and claims it arrived warm.

Price and Contract Considerations

Reefer freight usually costs more than dry freight, and rates swing with season and demand, so quotes differ widely. Ask whether fuel for the refrigeration unit is included or billed separately, and how detention and layover are charged if the receiver delays unloading. Clarify who is responsible if the unit fails in transit and the load spoils. Ask for a certificate of insurance and confirm that cargo coverage includes temperature-related loss, since some policies exclude it unless the carrier maintained the equipment. Get the pickup window, delivery appointment, and rejection process written down before the truck arrives.

Handle Claims and Rejections

If a load arrives and the receiver rejects it, act at once. Do not argue at the dock. Document the load temperature, take photos, and get the receiver's written reason. Notify the carrier and your insurer promptly, because claims often have short notice deadlines. Keep the logger data, bill of lading, and temperature records together. Contact your state department of agriculture or the federal agency that handles produce disputes to learn about inspection and arbitration options. Many disputes turn on who has better records, so start good habits on the first shipment. Look up your state in the directory on this site to find transport providers near you.

Find providers near you

Pick your state to see vets, custom operators, dealers, elevators and other farm services.

Keep reading