In short
- Weigh sample bales or demand a scale ticket, then convert freight to cost per ton.
- Get moisture readings and a forage test before the truck leaves the field.
- Confirm tie-downs, tarping, and legal load height are in the quote and agreement.
Know What You Are Hauling
Hay and forage come in small squares, large squares, round bales, stacks, chopped silage, and baleage, and each moves differently. Round bales roll and need chocks and straps. Large squares stack tall and catch wind. Baleage is wrapped and must not be punctured. Chopped forage goes in a dump or walking-floor trailer. Tell the hauler the bale type, size, weight, and count, and whether the hay is dry or wrapped. A 48-foot flatbed, a stretch trailer, and a pneumatic hay hauler are not interchangeable. If you are buying from a distant seller, ask who is responsible for loading and where the truck will be staged.
Do the Weight Math
Weight decides how many bales fit and what the load costs per ton. Here is a simple example for arithmetic only. Forty round bales at 1,200 pounds each weigh 48,000 pounds, which is 24 tons. If a hauler charges a flat 1,500 dollars for that load, the freight is 1,500 divided by 24, about 62.50 per ton. Bale weights vary widely with moisture, density, and species, so weigh a few sample bales or insist on a scale ticket. Hay sold by the ton should be weighed on a certified scale. Legal gross weight limits apply to the truck, and states differ, so check with your state transportation agency.
Check Moisture and Quality Before Loading
Hay baled too wet can heat, mold, and in the worst cases catch fire in the stack or trailer. Ask the seller for moisture readings and, if the hay is valuable or going to horses or dairy, request a forage test from a lab. Your Extension office can explain how to read the results. Inspect bales for mold, dust, and weeds as they load, and refuse any that do not match the agreement. Write down the quality expectations, including cutting, type, and any test values, before the truck leaves. Photographs at loading can settle questions about what was actually shipped.
Secure the Load and Protect It
A poorly secured hay load is a hazard to everyone behind it. Federal and state cargo securement rules require adequate tie-downs, and the number depends on the load's length and weight, so ask the carrier how they secure each tier and read the rule yourself. Tarps protect against rain on long hauls, and some buyers require them. Ask whether tarping is included in the rate. Stack height and width must stay within legal limits, or a permit may be needed. Ask about wind advisories and what the driver does when conditions worsen. Never accept a load stacked beyond what the straps can hold.
Find and Vet Providers
Local sources include hay brokers, trucking companies near hay country, Extension offices, state hay associations, and sale barns. Ask producers who have bought hay in volume who they trust. Verify the carrier's authority and insurance, and ask for a certificate showing liability and cargo coverage. Compare per-mile, per-load, and per-ton quotes on the same basis. Ask about backhauls, since a truck returning from a delivery may price a pickup lower. Confirm pickup and delivery windows, and who unloads. Agree on a procedure if bales are rejected or damaged at the receiving end.
Agree on Terms and Keep Records
Write down the loads, rates, dates, quality terms, and responsibility for loading and unloading. Include how weights are measured and how disputes are settled. Keep scale tickets, test reports, and invoices for tax and feed records, and ask your accountant how hay purchase and freight are handled. For hay crossing state lines, ask your state department of agriculture about weed seed, quarantine, or inspection requirements, since rules vary. Look up your state in the directory on this site to start building a list of local haulers.
Find providers near you
Pick your state to see vets, custom operators, dealers, elevators and other farm services.
