Farm service guides and a state-by-state directory for farmers and ranchersA farm.FM network site · Farm news →
AgServicesDirectoryWho to call, state by state
Home › Guides › Trucking, Hauling & Logistics › Loading and Securing Standards

Loading and Securing Standards

A load that shifts or falls is the shipper's problem and the driver's problem, so learn the basics of securement and how to check them yourself.

Trucking, Hauling & Logistics3 min read716 words

In short

  • Check the working load limit tags and retire any worn or unmarked strap or chain.
  • Load heavy items low, balanced, and within axle limits, using a certified scale when unsure.
  • Recheck the load shortly after leaving and keep photos and notes of how it was secured.

Why Securement Is Everyone's Business

When a load shifts, the driver may lose control, the cargo may fall onto other vehicles, and everyone who touched the load can face questions. Federal cargo securement rules apply to many commercial trucks, and states add their own, so rules vary and you should read the current regulations or ask your state highway patrol or department of transportation. The rules generally say that cargo must be contained, immobilized, or secured so it cannot leak, spill, blow off, fall, or shift. Farm loads are often awkward, heavy, and loose, which makes them harder than boxed freight. Treat securement as a shared job between farm and driver.

Understand Working Load Limits

Every strap, chain, and binder has a working load limit, which is the most force it should carry in use, and it is usually marked on a tag or stamped on the hardware. It is lower than the breaking strength. Here is a simple example for arithmetic only. If your cargo weighs 20,000 pounds, the combined working load limit of all tie-downs should generally equal at least half of that, so at least 10,000 pounds. Four straps each rated at 3,500 pounds give 14,000 combined, which meets that general idea. Other minimum tie-down counts depend on the cargo's length, so read the actual rule and the manufacturer's data. Retire any strap that is cut, frayed, or missing its tag.

Load for Balance and Weight Limits

Place heavy items low and centered, and spread weight over the axles so no axle exceeds its limit. Overloaded axles damage roads and bring fines, and shippers can share responsibility. Know the empty weight of the truck and trailer, and subtract it from the legal limit to find the cargo you can add. For grain and bulk loads, fill evenly and avoid one-sided piles. For machinery, put the heaviest part over or just ahead of the trailer axles according to the hauler's instruction. Weigh uncertain loads on a certified scale before leaving the yard. A few dollars at a scale beats a roadside ticket.

Secure Different Farm Loads

Round bales on a flatbed need to be chocked and strapped, with tiers staggered and the top layer tied across. Large equipment needs chains or heavy straps at the manufacturer's tie-down points, plus blocking for tracks or wheels. Pallets of bagged feed or seed need straps or wrap that keep them from sliding, and edge protectors prevent strap damage. Loose material such as grain, manure, or aggregate needs a tarp or cover where the law requires, plus a tailgate that latches. Livestock trailers need working latches, gates, and partitions. Ask the machine's manual or the carrier for the right anchoring points, and do not invent your own on a thin panel.

Inspect Before and During the Trip

Inspect the load before the truck leaves your property, then again soon after it starts moving, because loads settle. Drivers are normally required to recheck securement within a short distance after departing and periodically after that, and your hauler should know the details. Look at straps for slack, chains for twisted links, and tarps for loose corners. Check that lights, plates, flags, and any required signs are visible. If you load your own trailer, make this a routine, written on a short card kept in the truck. Teach everyone helping on your farm to speak up when something looks wrong.

Document and Share the Responsibility

Note in the bill of lading who loaded, who secured, and what equipment was used. If the driver refuses a load because it is unsafe, accept that decision. A driver who protects their license is protecting you too. Keep photographs of the loaded trailer and any damage. Ask your insurance agent how a loading error would be handled under your farm liability policy, since coverage depends on the policy. Consider a short training session with your crew based on the carrier's recommendations or a state agricultural safety course. Look up your state in the directory on this site to find hauling providers near you.

Find providers near you

Pick your state to see vets, custom operators, dealers, elevators and other farm services.

Keep reading