In short
- Describe the work, location and materials in plain, checkable terms.
- Set standards, schedule, exclusions and a written change-order rule.
- Tie final payment to a walk-through and sign-off, and keep photos.
What a Scope of Work Is For
A scope of work is the part of the agreement that describes the job. It is not a legal document by itself, but it often becomes the center of any dispute, because the question is nearly always "was this part of the job?" Write it so a stranger could read it and know what should be done. If you and the provider both understand the job, the scope takes half an hour to write. If you do not, the scope will force the conversation that would otherwise take place after the work goes wrong. Write it before the price is final, because the price depends on it.
Describe the Work and the Location
Start with the basics: who is doing the work, for whom, and where. Identify the fields, pastures, buildings or pens by name or number, with acres or dimensions where it matters, and attach a map or aerial photo if you can. Describe the work in steps, in plain words. For example, "Fence the north pasture along the county road, about 2,640 feet, with treated posts every 12 feet, five strands of high-tensile wire, and a 16-foot gate at the southeast corner." That sentence can be checked. "Fence the north pasture" cannot. Include what the provider supplies and what you supply, such as materials, water, power or access.
Set Standards and Measures
Say how you will decide that the work is good. Standards might be a seed depth, a spread rate, a compaction level, a tolerance for post lean, a soil test target, a withdrawal time or a manufacturer specification. Refer to the equipment manual, product label, Extension recommendation or industry standard instead of writing vague words like "good quality." Say how the work will be measured, such as by acres on a GPS record, loads on scale tickets or hours on a log. If a government program is involved, check with the agency about requirements. Rules vary, so confirm the details.
Timeline and Conditions
Give a start date, a finish date and any milestones. Add what happens if weather, soil conditions or breakdowns cause delays. A typical clause might say that work will begin within a certain number of days of fieldwork being possible, and that either side will notify the other if the schedule slips. Describe site conditions you know about, like wet spots, buried tile or livestock movement, and tell the provider what to do about them. If you need the provider to coordinate with others, such as a seed dealer or a trucker, say who calls whom.
Exclusions, Changes and Cleanup
List what is not included. Common exclusions are permits, soil testing, disposal of old materials, repairs to existing damage and work outside the described area. Then write how changes are handled. A good rule is that no extra work gets done or paid for without a written change order signed or emailed by you. Describe cleanup: gates closed, debris removed, ruts repaired where reasonable, and fuel or chemical containers taken away. Cleanup is often where bad feelings begin, so be specific.
Acceptance and Sign-Off
Say how and when the work will be inspected, who inspects it, and how long you have to point out problems. A common arrangement is a walk-through after completion, with a list of any items to fix. Make final payment depend on that sign-off. Both parties should sign or confirm the scope by email, and each should keep a copy. Photos taken before and after are cheap insurance. If the job is large, have an attorney review the final document, as rules about contracts vary by state.
Find providers near you
Pick your state to see vets, custom operators, dealers, elevators and other farm services.
