In short
- Verify license and certification with your state agriculture department, not just a verbal claim.
- Put product, rate, carrier volume and weather limits in the work order.
- Get full application records and a certificate of insurance before the first load goes on.
Licensing comes first
Commercial pesticide application is regulated, and in most states a business that sprays for hire needs a license, and the person applying needs to be certified, often in specific categories. Rules vary by state, so look up the provider on your state department of agriculture's license lookup, or call them. Do not take a verbal "yes, we are licensed." Ask to see a current card and the category it covers, such as agricultural plant or aerial. If you spray restricted-use products yourself, your own private applicator rules are different. Check them with your state agency or Extension office so you know which responsibilities stay with you.
Equipment and calibration
Ask what rig is coming and when it was last calibrated. A sprayer is only as accurate as its nozzles, pressure and speed. The basic check is a formula found in most nozzle catalogs: gallons per acre equals gallons per minute per nozzle times 5,940, divided by miles per hour times nozzle spacing in inches. Example: a nozzle putting out 0.4 gallons per minute, on 20-inch spacing at 10 miles per hour, gives 0.4 times 5,940, which is 2,376, divided by 200, or about 12 gallons per acre. Ask the operator to show the calibration record and compare it with the nozzle maker's chart. A worn nozzle can over-apply on one side and under-apply on the other.
Product, rate and label
The label is the law. Ask who chooses the product and who is responsible if the rate is wrong. If a retailer recommends it, ask for the label and the reason. Check crop stage limits, rotation limits, grazing and harvest intervals, and tank-mix rules. Never agree to "whatever it takes." Put the product, rate, carrier volume, adjuvant and target pest in the work order. If you grow for a buyer, food company or organic certifier, check their restrictions as well, because some products allowed by label are not allowed by the buyer.
Drift, neighbors and sensitive crops
Ask how the operator decides whether to spray: wind speed and direction, temperature inversions, humidity and nozzle choice. Know what is next to your field. Vineyards, gardens, beehives, organic fields, ponds, and homes need special care. Tell the operator before the job, and tell your neighbors too. Many states ask for a drift complaint to be filed quickly, so ask your state agency what the time limit is. A spray log with wind and weather at the time of application is your best friend if a problem arises.
Records and paperwork
Certified applicators keep records, and you may need copies. Ask for date, time, field, acres, product name, EPA registration number, rate, applicator name and weather. These records matter for crop insurance, buyer audits and any dispute. Ask how soon you will get them. The operator should also provide a certificate of insurance, and you should check what the policy covers, because many general policies exclude pollution or drift. Ask your insurance agent whether you need to be added or whether you need your own coverage.
Starting small
If the provider is new to you, begin with a modest field and watch the work. Stand where you can see the boom and the weather. Look at the field a week later for skips, overlap and crop injury. If something looks off, take photos and call the same day. Spraying is a trust business. The first job is the audition. Ask also whether the operator rinses the tank between products, since leftover residue from a previous job can injure a sensitive crop, and where rinsate is disposed of. The product label and your state agriculture department set the rules for cleanout and disposal, and those rules apply on your ground as well as theirs.
Find providers near you
Pick your state to see vets, custom operators, dealers, elevators and other farm services.
