Farm service guides and a state-by-state directory for farmers and ranchersA farm.FM network site · Farm news →
AgServicesDirectoryWho to call, state by state
Home › Guides › Custom Farming & Field Services › Hiring a Custom Combine Operator

Hiring a Custom Combine Operator

Harvest leaves no room for a bad hire. This guide covers how to vet a custom combine crew, what to agree on before the first pass, and how to keep grain losses visible.

Custom Farming & Field Services3 min read695 words

In short

  • Book a combine crew early and call references about problems, not just successes.
  • Get acres, extras, moisture and weather rules in writing before the first pass.
  • Walk fields behind the combine and speak up about loss the same day.

Start early and ask around

The best custom cutters get booked well before the crop is ready, so start your search in summer, not when the beans rattle. Ask neighbors, your elevator, your crop adviser and your equipment dealer who they trust. Be wary of a stranger who shows up at the end of the lane offering a low price, especially in a wet fall when everyone is behind. A good reference is a farmer with similar crop, field size and ground conditions who got the same crew two years running. Call at least two references and ask what went wrong, not just what went right. Everyone has a story, and how the operator handled the bad day tells you more than the good ones.

Know what machine is coming

Ask for the make, model, head type and approximate hours of the combine, and whether the head fits your crop and row spacing. A corn head set for thirty-inch rows will not do well in a field planted twenty inches. Ask whether a grain cart and trucks come with the crew or whether you supply them. Ask about a spare head, a spare operator and how quickly they can get parts. Check that the operator can run the machine's yield monitor and calibrate it, if you want yield data. Machines this big are only as good as the person in the seat, so ask who is running it and how long they have done it.

Quote, scope and extras

Combining is usually priced per acre, sometimes with different rates for corn, soybeans, small grains and sunflowers. Ask what is covered. Is hauling to the bin included? Is there a charge for lodged or down crop, or fields with trash, rocks or ditches? Is there a minimum acre charge or a move-on fee? Is there a fuel surcharge? Many farmers are caught by a base price that sounds fair and then climbs through add-ons. Ask for the quote in writing, with every extra spelled out, and compare it against a local university Extension custom-rate survey so you know what range is normal for your area.

Field prep and shutdown rules

Your part of the deal is a field the combine can work. Walk each field before the crew arrives. Mark downed power lines, old well heads, tile risers, terrace breaks, wet holes and big rocks. Check that gates are wide enough and that bridges and culverts can take the machine's weight. Agree on a moisture range for the grain and what happens if it is outside that. Agree on what the crew does when it rains, when the dew stays late, and when a field is too wet to cut without ruts. Put those rules on paper so nobody is arguing in the mud.

Watching grain loss

Harvest loss is easy to ignore and expensive to learn about later. Ask the operator how they set the machine and how often they check behind it. Get out of the cab, walk the field and look for grain on the ground. Your state land-grant university Extension office publishes loss-checking methods using counts per square foot, and the combine manual explains how to adjust speed, fan and sieves. If you see loss, say so that day, not at the end. A short call on the first field costs less than a week of quiet complaining.

Payment and paperwork

Agree on when you pay: per field, weekly, or at the end. Ask for a final acre count from the machine monitor or a field map, and compare it with your own records and your FSA acreage. Ask for a certificate of insurance and a signed W-9 if your accountant needs it. Whether the operator is an independent contractor or an employee for tax and labor purposes is a legal question, so confirm with your attorney or accountant before you pay anyone in cash.

Find providers near you

Pick your state to see vets, custom operators, dealers, elevators and other farm services.

Keep reading