Farm service guides and a state-by-state directory for farmers and ranchersA farm.FM network site · Farm news →
AgServicesDirectoryWho to call, state by state
Home › Guides › Grain Storage, Drying & Elevator Services › Grain Drying Services and Rates

Grain Drying Services and Rates

Custom drying can save a harvest or quietly eat the profit. Learn how elevators and dryers charge, how to check the math, and what to confirm before a wet load goes in.

Grain Storage, Drying & Elevator Services3 min read630 words

In short

  • Charges come as a rate per point per bushel plus shrink, so work both numbers before delivering.
  • A rule of thumb of 1.2 percent shrink per point means 5 points on 5,000 bushels loses about 300 bushels.
  • Ask for moisture retests, the base moisture and the rate sheet in writing.

Why Farmers Hire Drying

When corn comes out of the field wet and your own dryer is full, a custom dryer is the next call. Elevators, co-ops and a few farms with spare capacity offer the service. The appeal is simple: harvest keeps rolling and you do not wait on a dryer. The risk is also simple. You pay for moisture points and for the shrink that follows, and a couple of surprises can make a good bushel of wet corn a poor one. Know your options before the first load is cut. Compare drying against letting the crop stand a few more days, which can cost less if the weather cooperates.

How Drying Is Charged

Most operators charge per bushel per point of moisture removed, often with a minimum charge and sometimes a higher rate for very wet grain. Some add a flat handling fee. On top of that comes shrink, the weight lost as water leaves. Rates differ by region, fuel cost and operator, so ask for the current schedule in writing. Also ask what the base moisture is, because the standard varies by crop, and what the dryer does to quality, including whether the dryer is a high-temperature unit that can stress kernels. University Extension grain drying publications explain the physics in plain language.

Working the Numbers

Here is a worked example with simple figures. Say you deliver 5,000 bushels of corn at 20 percent moisture and the target is 15 percent. That is 5 points of drying. If the dryer charges a rate per point per bushel, multiply that rate by 5 and then by 5,000. Next, the water shrink. A common rule of thumb is about 1.2 percent weight loss per point of moisture, which here is roughly 6 percent. Of 5,000 bushels, that is about 300 bushels gone as water, leaving about 4,700 bushels. Ask the operator which shrink factor they use, and whether it matches what the manual or Extension says.

Questions Before You Deliver

Ask who tests the moisture and what meter they use, and whether they will retest in front of you. A tenth or two of a point adds up across thousands of bushels. Ask how long the load will wait before it dries, since wet corn heats in a pile. Ask what happens if the dryer breaks down mid-harvest. Ask whether the grain is commingled or kept separate and how it is graded on the way out. Ask what the rate is for damaged, high-test-weight or low-test-weight corn if the operator adjusts it.

Mistakes That Cost Money

The big one is over-drying. Taking corn to 13 percent when 15 is the target gives away weight you could have sold as water. Another is accepting a single moisture reading from a wet sample taken at the top of the truck. A third is not checking whether the elevator applies a drying charge and a shrink charge that overlap. Keep a notebook and compare your own on-farm numbers with the scale tickets. If they do not agree, ask questions the same day.

Get It in Writing

Request a rate sheet, a shrink table, a statement of how grain is graded and settled, and any minimum charges. Keep every ticket. If you finance the crop, tell your lender where wet grain is going. For disputes, ask your state department of agriculture about its grain complaint process and the rules for weights and measures.

Find providers near you

Pick your state to see vets, custom operators, dealers, elevators and other farm services.

Keep reading