Farm service guides and a state-by-state directory for farmers and ranchersA farm.FM network site · Farm news →
AgServicesDirectoryWho to call, state by state
Home › Guides › Agronomic Consulting & Soil Testing › Manure and Compost Testing

Manure and Compost Testing

Manure and compost carry real fertilizer value, but only a lab test shows how much. Learn how to sample, what to ask for, and how to turn results into rates.

Agronomic Consulting & Soil Testing3 min read646 words

In short

  • Sample many spots, mix well, and agitate liquid storage before collecting.
  • Check whether results are wet or dry basis before converting to application rates.
  • Calibrate the spreader and test again whenever feed, bedding or storage changes.

Why Book Values Fall Short

Table values for manure nutrients are averages, and your pile is not average. Diet, bedding, storage, moisture and handling change nutrient content a great deal. Liquid manure from one barn can differ from the next barn across the road, and the same lagoon varies by depth and by season. Compost shifts with its feedstock and how long it cured. Testing lets you credit the nutrients you really have, avoid overapplication and show good records. It also keeps you from spreading more phosphorus than the field can use, which is where many problems start.

What to Ask the Lab to Measure

A basic manure or compost test reports moisture or dry matter, total nitrogen, ammonium nitrogen, phosphorus, potassium and often organic matter and pH. Ask for sulfur, calcium, magnesium, sodium and micronutrients if they matter on your soils. For compost, add soluble salts, since high salt can hurt seedlings, and ask about maturity or stability tests if you are using it in sensitive settings. Ask whether results are reported on a wet or dry basis, because mixing them up is a classic error. Check your state Extension guidance for recommended methods.

Taking a Representative Sample

For solid manure or compost, take many small samples from different spots and depths in the pile or from the spreader, mix them in a clean bucket, and send a portion. Avoid sampling only the crust or only the center. For liquid manure, agitate the storage first, then collect from the pump or the stream during loadout, and mix several subsamples. Use the lab's container and leave headspace for liquid, since gases can build up. Follow safety practices around manure pits, as the gases can be deadly. Never lean over or enter a pit. Label the sample and ship cold.

Timing and Frequency

Test each source at least once a year, and again if feed, bedding, housing or storage changes. Sample close to when you will spread, because nutrient content shifts in storage. Some operations sample at each application, which gives the best data. Keep results for each pile or storage and each year. Many nutrient planning rules require or recommend regular testing, and requirements differ by state, so confirm with your state department of agriculture and your local conservation district.

Turning Results Into Rates

Here is a worked example. Suppose a lab reports a solid manure at 25 pounds of total nitrogen per ton, with about 40 percent of it available in the first year under your state's guidance, giving 10 pounds of available nitrogen per ton. A field needs 100 pounds of nitrogen from manure, so divide 100 by 10 and you get 10 tons per acre. Then check the phosphorus that rate delivers against crop removal and soil test levels, because phosphorus often limits the rate before nitrogen does. Availability factors come from your state guidance, so do not rely on the figures here.

Calibrate the Spreader

A good test is wasted if the spreader puts out a different rate than you think. Calibrate by weighing the load, measuring the area covered, and dividing weight by acres. For example, if a spreader holds 6 tons and covers 0.75 acre per load, the rate is 6 divided by 0.75, or 8 tons per acre. Adjust gate and speed settings, and recheck. Follow the equipment manual, and check setbacks, weather limits and frozen ground rules with your state agency.

Pick a Lab and Keep Records

Choose a lab that regularly handles manure and compost and takes part in a proficiency program. Keep each result with spreading dates, rates and fields. Look up your state in the directory for testing and nutrient services.

Find providers near you

Pick your state to see vets, custom operators, dealers, elevators and other farm services.

Keep reading